Floor Heating Controller, 3-meter NTC Sensor, AC308, 86-type Embedded Electric Floor Heating Thermostat

①. Foil heating mat controller thermostat. Room thermostat controller floor temperature controller. Tired of constantly monitoring the room temperature and manually turning the underfloor heating on or off when necessary? In such cases, a temperature controller is suited. Our thermostat is easy to use, has a range of 5-40 °C, and can be integrated into electric heating. ②. Advantages of the thermostat: Range from 5 to 40 degrees Celsius. Mounted at the bottom. Designed for electric heating systems. Easy to operate. Meter long NTC sensor. Simple thermostat for underfloor heating systems. ③. If you need an easy-to-use yet practical thermostat suitable for controlling an electric underfloor heating system, the product we offer should meet your requirements. The controller has several functions that allow precise control of the temperature of the underfloor heating system, regardless of whether a heating mat or heating film is used. The thermostat will also be compatible with other heating devices, such as an electric heater or heating cables. ④. The temperature controller is easy to install and will fit in homes, offices, and commercial buildings. An easy-to-use underfloor heating thermostat. ⑤. The thermostat controls the floor temperature using a built-in NTC sensor, which is very sensitive to heat changes. Although the device looks inconspicuous, its range of functions is wide. The manual control panel has an on/off switch, a 5-40 degree Celsius temperature setting dial, and an LED indicating the heating mode. The panel is very easy to read, so learning to operate the device is no problem. ⑥. It is worth noting that the model has an IP20 protection class, which means that it can be installed in rooms with high humidity, such as a bathroom. In addition, the thermostat consumes little energy, and its minimalist design will fit into many interiors, whether it is a kitchen, a bathroom, or a living room. ⑦. Thermostat specifications: Model: AC308. Floor temperature adjustment range: 5-40℃. Floor sensor: NTC 3 m. Protection degree: IP20. Installation: flush-mounted, mounting box ɸ60 mm. Dimensions: 86 x 86 x 5 mm. LED: 1x red. Power switch: manual. ⑧. Kit contents: Thermostat. 3 m NTC sensor. Installation accessories. Instructions in Polish. SKU: 16285548