Fangrui Product Details 1. Agp, Pci-e Tester Is Mainly Used To Test The Open Circuit And Short Circuit Of The Data Bus Connecting The Computer Image Card Chip Cpu And The Computer Motherboard Pci To The Ground 2. When Repairing The Computers Image Card Failures Such As Non-display, Blurry Or Unstable Display, It Is Not Necessary To Use A Multimeter To Measure The Pci Bus Interface Between The Image Card Golden Finger And The Motherboard One By One. This Image Card Tester Can Quickly Detect The Open Circuit And The Cpu Short-circuit Failure, With Accuracy, Is A Standing Tool For Repairing Image Cards. 3. When Repairing The Computer Image Card, If The Display Card Does Not Display, The Screen Is Blurred, Etc., First Check The Appearance For Obvious Burnt Marks, Whether The Pcb Is Obviously Disconnected, And Whether The Voltage Of Each Group Is Normal. If It Is Normal, Use A Tester To Further Measure The Cpu Whether The Data Cable Connected To The Motherboard Pci Interface Is Normal. 4. Add A 12v Power Supply To The Tester, I