1. For Banana pi -M2 Zero is an extremely small single-board computer. It is designed with the Allwinner H2+ chip solution. It can also be used directly with the Allwinner H3. The size is exactly the same as the Zero W. The size is 60mm x 30mm2. Support onboard WIFI and Bluetooth, 512M memory, Mini -compatible interface.3. For Banana Pi -M2 Zero supports Android, Debian linux, , Raspbian , which can be used for IoT and educational application development.Module: for Banana Pi -M2 ZeroCPU: H3+ -core -A7 H265/HEVC 1080PGPU: Mali400MP2 GPU @600MHz, Supports OpenGL ES 2.0Memory (SDRAM): 512M DDR3 (shared with GPU)Onboard Storage: TF card (Max. 64GB)Onboard Network: ( can extension with PIN define)PoE power: Onboard flash: Onboard WIFI: SDIO AP6212 (option AP6181, AP6335)Video decoding: 1080p@60fps, 264 Video encoding 1080p@30fps, 264Video input: A CSI input connector CameraVideo Outputs: mini -compatible 1.4, 1080P@30fps, DHCPAudio Output: Mini -compatiblePower Source: -USB with 5V/2AUSB 2.0 Ports: one USB 2.0 OTGButtons: Power Button, Reset ButtonLow-level peripherals: 40 Pins Header, compatible with 3uart GPIO(1x3) pin: UART, groundLED: Power led & Status ledIR: N/ASupported OS: android linxProduct size: 65mm x 30mmColour:blueMaterial:PCB+metalPackage Contents:1 x -M2 Zero development board1 x acrylic case1 x heat sink1 x screw packageOnly the above package content, other are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed is +/- 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.