説明
For Seeed Studio XIAO Debug Mate Debugger Tool DAPLink Debug for SWD Interface UART Grove OpenOCD PyOCD LCD
For Seeed Studio XIAO Debug Mate Debugger Tool DAPLink Debug for SWD Interface UART Grove OpenOCD PyOCD LCD
DAPLink-Compatible SWD Interface for Professional Chip-Level Debugging:Powered by ESP32-S3 with full OpenOCD/PyOCD support, delivering professional-grade debugging capabilities. Set breakpoints, step through code, inspect memory, and access low-level hardware operations with precisio
Intelligent Serial Monitor & UART Passthrough: Monitor communications between your XIAO and the XIAO Debug Mate, or between the XIAO Debug Mate and external UART devices (Arduino, Raspberry Pi, Grove sensors)
Precision Power Profiling: Track power consumption down to μA levels with three specialized measurement interfaces. Monitor voltage/current readings, ultra-low-power states, and consumption patterns with peak/valley identification. Each unit is factory-calibrated for maximum accuracy (±10% accuracy @ 1-10μA)
Standalone Visual Feedback System Monitor key system metrics without connecting to a PC. The integrated 2.01" LCD screen displays real-time serial communications, power consumption readings, and UART data streams, while the programmable LED matrix provides instant Baud rate indicators
Purpose-built for the Seeed Studio XIAO ecosystem with direct plug-and-play connection support-any pre-soldered XIAO board connects instantly without tedious wiring. The thoughtfully designed pin headers and sockets transform the device into a specialized expansion breadboard for XIAO development
Seeed Studio XIAO Debug Mate is an open-source ESP32-S3 multi-tool that simplifies embedded system debugging with visual feedback. This all-in-one device features a standalone 2.01 inch TFT LCD display, LED status matrix, and native Seeed Studio XIAO support, delivering essential debugging functions: DAPLink chip-level debugging, built-in serial monitoring with UART passthrough, and accurate power consumption measurement. Plug-and-play design eliminates complex wiring for streamlined development.
Specification
Processor:Espressif ESP32-S3
Power Input:USB-C 5V/1A
Display:2.01 inch TFT LCD with 240 x 2
-
ブランド:
Unbranded
-
カテゴリー:
開発ボード
-
Fruugo ID:
466019139-979138434
-
EAN:
9386742219643
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Important Safety Instructions
Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction.
General Warnings
Intended Use: Use this product only for its intended purpose as described in the user manual.
Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision.
Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.
