This is a high-performance video decoding module that can automatically detect and convert standard analog video signals, such as NTSC, PAL, and SECAM, into 4:2:2 image formats, and output data through an 8-bit ITU-R BT.656 standard interface. TVP5150 is compatible with a wide range of video devices, such as DVD players and set-top boxes. A typical CCD camera is a reverse image camera. Specification parameters: Supports NTSC, PAL (m) (B, D, G, H, I, M, N), Pal60 video data Low power consumption: Less than 150mW A/D Conversion: Supports high-speed 9-bit A/D conversion, and the host can control brightness, contrast, saturation, and color tone control Programmable output data rate: -12.2727-MHz square pixel (NTSC) -14.75-mHz Square Pixel (PAL) -13.5 MHz ITU-R BT.601 (NTSC and PAL) Video input:The analog input channel can accept two CVBS video inputs (AC coupling, 0.1uF) Analog input ports can be connected: two selectable composite video inputs, one s-Video input Standard Programmable Video Output Format: ITU-R BT.656, 8-bit 4:2:2 Embedded Synchronization, -8-bit 4:2:2 Discrete Synchronization Note: Installation guide not included, we strongly recommend you professional installation. Please check as much as possible to make sure the item is what you need. Tips:The product may be updated constantly,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use Color:Red Material:PCB Package Contents: 1 * Video decoder Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.