Features WORK DETAIL: When the liquid level of the container is abnormal, the alarm signal from the liquid level sensor is triggered to control the water pump to adjust the water level. SENSITIVITY ADJUSTABLE: You can adjust the sensitivity. Remove the plastic cover of the controller, turn the very small screw, reduce the sensitivity clockwise, and increase the sensitivity counterclockwise. EASY INSTALLATION: Installation is simple and convenient. The water level controller can be installed by screw positioning or electric box track. ABS MATERIAL: Made of premium ABS material, the liquid level controller is wear resistant and impact resistant, ensures long term sensitive work. WIDE APPLICATION: Relay dry node output, which can be used for various load control, such as filling or emptying oil tank. Specification: Item Type: Water Level Controller  Material: ABS Input Voltage: AC100V-260V, 50 60Hz Working Current: Working current less than or equal to 110mA, static current consumption less than or equal to 20mA Load Power: Resistive load is less than 1.6KW (overload or three phase load requires additional AC contactor) Inductive load below 1KW (overload or three phase load requires additional AC contactor) Inductive load refers to the load with inductive coil, such as motor, electromagnet, solenoid valve, etc. Alarm Output: 800W (resistive load) normally open, normally closed output Output Mode: Normally open, normally closed output Input Signal: Induction signal input Sensing Head Interface Voltage: DC12V Working Temperature: - 20 to 105 ℃ Overall Size: Approx. 115 x 90 x 40mm / 4.53 x 3.54 x 1.57in  Package List: 1 x Water Level Controller 1 x Screwdriver  Package List 1 x Water Level Controller 1 x Screwdriver