G1/2in Thread Stainless Steel Matte Surface Basin Water Faucet Bathroom Hot Cold Water TapSquare Shape Condition: Item Type: Water Faucet Main Material: 304 Stainless Steel Surface Technology: Paint Suitable for Basin: Single Hole Basin Structure: Single Connection Forming Process: Gravity Casting Water Pipe Connection: G1/2in Thread Function Category: Mixed Faucet Shape: Round Shape, Square Shape (optional) Round Shape Size: Approx. 17 x 11 cm / 6.7 x 4.3 in Square Shape Size: Approx. 19 x 10.5 cm / 7.5 x 4.1 in Weight: Approx. 651g-942g / 23oz-33.2oz Installation Steps: First thread the hose into the threaded pipe, then clockwise the hose into the bottom of the faucet, and finally screw the threaded pipe into the faucet. 1. Put the O-ring into the grooves on the bottom of the faucet and screw in the hot and cold water hoses. 2. Put the hose gently through the basin mounting hole. 3. Put both hoses into the mounting holes at the same time. 4. Place the faucet on the basin. 5. Then place the gasket and the fixed copper piece in turn and tighten with a tool. 6. After adjusting the direction of the faucet, tighten the bottom part and installation is complete.