Item Type: Electric Solenoid Valve Material: Nylon,stainless steel Thread Interface: G1/4 Water Valve Type: Normally closed water inlet valve Operating environment altitude does not exceed 2500 meters; atmospheric pressure is 86~106KPa Ambient Temperature: +1~+45; Water Temperature: 0~ +100; Storage and Transportation Temperature: -30~ +60 Protection Grade: IP00 Relative Humidity: 95% Rated Working Voltage: DC12V Inner Diameter/Outer Diameter: Approx. 9mm / 0.4in, 13mm / 0.5in Working Pressure: 0.02~0.8MPa Thread Length: Approx. 12mm / 0.5in Coil Resistance: 27.7 Package List 1 x Electric Solenoid Valve The solenoid valve is mainly divided into normally open, normally closed, inlet valve and drain valve. The explanation is as follows, buyers must choose according to their own requirements, so as to avoid unnecessary losses caused by unsuitable purchases.1. Normally openrefers to closing the valve when energized2. Normally closedrefers to opening the valve when power is applied3. Water inlet valverefers to the water pressure environment of 0.020.8MPa, where there is water pressure4. Drain valverefers to the water column used at the working pressure of 400mm 1This valve come with stable performance, sturdiness and durability, safety and reliability 2Electric solenoid valvewith high sensitivity, quality assurance, and beautiful appearance 3The product have directacting diaphragm structure, no pressure start, expanding its application field 4Normally closed inlet valve adopt threaded interface design, possess simple and convenient installation 5Adopt imported stainless steel springs and goodquality materials, the normal operation is not less than 200,000