Function: 1. Effective Protection of Equipment Safety: Multifunctional lightning protection for network monitoring equipment according to IEC and GB standard design, suitable for AC or DC power supply, and the integrated design reduces protection cost and installation space, which can fully protect network monitoring equipment! 2. High Transmission and Low Loss: This lightning protector has a high transmission frequency, low insertion loss, and a low attenuation factor to ensure that the lightning protection does not affect the system's performance. 3. Robust Aluminum Housing: Low VSWR ensures that the lightning protector does not interfere with the normal operation of the system, and the metal housing effectively prevents interference from external signals. 4. Application of Various Network Interfaces: This lightning protector is suitable for the front-end network cameras of the monitoring system, network line lightning protection, to reduce the damage of induction lightning. 5. Simple Installation: This lightning protector is very easy to install, you just need to connect the connector to the interface to complete the installation. Specification: Item Type: Network 2 In 1 Lightning Protector Model: LTFL R220 Material: Aluminum Alloy Power Supply Part Electrical Parameters: Nominal Working Voltage (Un): 220V Maximum Continuous Working Voltage (Uc): 350V Rated Discharge Current (In): 5KA Maximum Throughput Capacity Imax (8/20us): 10KA Voltage Protection Level Up at In: 1000V Connection Form: Crimp type Operating Environment: Ambient Temperature: Approx. -40-85 / -40-185 Relative Humidity: 95% Electrical Network Parameters: Nominal Working Voltage (Un): 5V Maximum Continuous Working Voltage (Uc): 8V Nominal Discharge Current In (8/20us): 5KA Maximum Throughput Capacity Imax (8/20us): 10KA Limiting Voltage (10/700uS) Core line to core line: 15V Response Time (Ta): 1ns Transmission Rate VS: 100Mbps Connection Form: RJ45. Package List: 1 x Network 2 In 1 Lightning Protector