Feature:For GLC GLS W167 X253 X167 2019 2020 Adhesive design, tape on the back, easy to paste Easy and quick installation even for beginners. Baking finish with surface and luxury high-end lookName: exhaust muffler coverItem type: Styling MoldingsColor: BlackMaterial: Stainless Steel Fit: for GLC GLS W167 X253 X167 2019 2020Installation Instructions:1. Wipe the surface where you will stick. Keep dry and clean.2. Determine the installation location, and then compare the product and the installation location. If the product does not fit your vehicle, please plug in immediately and do not install.3. When tearing off the double sides of the glue-covered covers, you can not press the double-sided paste by hand.4. For better effect, if the temperature is 20 degrees, we suggest double-sided adhesive heating with a hair dryer or lighter. (Do not heat over 40 degrees).5. Align the position, then paste. The effect of the paste depends on the conditions of the paste and the correct installation.6. Press firmly, especially at the edges, at least 2 minutes after installing.7. Do not press water and keep dry after installation for at least 72 hours. Or it will be easy to fall. Package Contents: 2 x Exhaust Muffler CoverOnly the above package content, other products are not included. Note: The light and different displays may cause the color of the item in the picture to be slightly different from the real thing. The allowed measurement error is +/- 1-3cm.