You will receive: 1 piece of black hand shower holder. Material: Made of outstanding ABS plastic, anti-rust, waterproof, durable, lightweight but with good bearing capacity. Features and function: designed to support the shower head, no need to drill, just fix it by the back adhesive film to prevent the walls from being damaged. How to fix: Measure the installation height. Make sure the wall is dry and clean. Tear off the adhesive film. Squeeze the air out when you place it on the wall. Wait half a day or a day to let it dry. Suitable on: Non-porous, smooth and paperless surfaces. Better to be used on ceramic tile, mirror, marble and glass wall. Tear off the adhesive film. Pull out the air from the bottom of the stand when you place it at the correct position you measured. Wait 12 or 24 hours until the adhesive film is dry and fix before placing the shower head on the support. Please know: Please allow 1-2mm deviation due to manual measurement. Please read the appropriate wall type and installation precautions carefully. Scope of delivery: 1 x shower holder