Condition: New Color: White Material: Nylon These cable ties are suitable for various applications, including drilling platforms, naval vessels, railways, and aviation. Pulling Force: 8.1 kg (for 100 x 2.5 mm size) Applications: These cable ties are designed for permanent binding, fastening, and sealing. They are commonly used for securing electrical cables and can be applied wherever a non-removable fastening solution is required. Instructions: Place the cable tie around the objects to be secured. Insert the free end into the locking head until the pre-closure tooth aligns. Adjust the position of the objects if needed (reopening slightly, if necessary). Then pull the toothed end firmly to tighten. Trim any excess material near the head after tightening. Operating Temperature Range: –40°C to +85°C Installation Temperature Range: –10°C to +60°C Maximum Continuous Heat Load: +110°C Melting Temperature: +256°C Package Contents: 50 x Nylon Cable Ties Note: Color may vary slightly due to monitor settings. Measurement tolerance: ±1–3 cm.