Specifications Processor: STM32F405RG 168MHz 1024KB Flash 196KB RAM Voltage input: 7~60.9V (2S~14S) Continuous current: 200A Burst current 400A @ 25鈩?1 sec 1000A @ 25鈩?Max current sensing: 376A Voltage accuracy: 卤0.1V Current accuracy: 卤5% Temperature accuracy: 卤1鈩?/font> Power port output: 5.3V/3A each port Protocol: DroneCAN Operating temperature : -25鈩?/font>~105鈩?/font> Firmware upgrade: Support Calibration: Support Power & CAN Port: Molex CLIK-Mate 2mm 6Pin Battery IN/OUT Options: XT90 Connectors/Tinned Wires/XT90 & Ring Terminals Flashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection Flashing slowly (one-second intervals): CAN is successfully connected Size: 45mm脳41mm脳26mm (Not Include Cable) Weight: 185g (Include Cable) Feature: 1.Supports 2-14S & 200A Cont, 400A Burst 2.DroneCAN Communication Protocol 3.Small & Compact Design 4.Two 5V Output with Independent BEC IC and Circuitry 5.Separated Sensor and BEC Board to Minimize Electrical Noise Interference 6.Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified) 7.High Accuracy Temperature Sensor for Temperature Monitor 8.High-Efficiency Aluminum Heat Dissipation Shell Package included: 1X XT90 Connectors/Tinned Wires/XT90 & Ring Terminal