1、First of all, it can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported. 2、Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm ran 3、Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure. 4、Like programmable brake on stop force. Which allows control of the braking of fixed wing props. 5、Like improved direction change in bidirectional mode. Description: The Tekko32 ESC runs in conjunction with an ARM 32bit compatible MCU. It can run input signals with lower latency, at faster rates, smooths out the RPM band, is capable of both voltage and current monitoring and limiting, as well as offering customization of the brake on stop force. Unlike current ESCs, the Tekko32 ESC has A LOT of room to grow and wide compatibility range with future products. One of the nicest features with the Tekko32 35A ESC is the auto timing feature, which (essentially) is designed to offer the pilot the smoothest and most efficient flight experience available, which is a freestyle pilots dream come true. Feature: First of all, it can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported. Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them. Like auto timing. Which is not the option to choose if you're after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice. Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure. Like programmable brake on stop force. Which allows control of the braking of fixed wing props. Like improved direction change in bidirectional mode. 32bit compatible ESC (Blheli_32) Dshot1200 up to 32kHz Incredibly small size Very low weight Auto timing feature On-Board RGB LED Build in current sensor Smooth response Compatible to Betaflight F3/F4 flight controller Specification: Item name: Tekko32 35A ESC Lipo input: 2-6S Size: 15*30mm Weight: 51g / 1.8oz Package list: 4 * Tekko32 35A ESC 4 * 26AWG 100mm black wire 4 * 26AWG 100mm white wire 4 * 26AWG 100mm blue wire 4 * 18AWG 100mm red wire 4 * 18AWG 100mm black wire Note: The actual product color may deviate from the photo due to light. There may be a slight deviation in the measurement of product.