HSCAN/MSCAN V1.5 OBD2 Diagnostic Scanner Coding Reader Detector Tester Replacement for Ford Item Type: Diagnostic Scanner Material: Plastic Technical Details: 1. Latest version replacement for Ford compatibility 2. Manufactured modification to include a switch to connect to different CAN buses 3. Designed for FORScan software 4. Compatible with software venders; FORScan, Elmconfig, FF2 and FoCCCus, plus more 5. MS CAN bus and HS CAN bus support 6. Drivers and instructions included Introduction: One OBDII OBD2 USB with switch. Designed for communicating replacement for Ford, replacement for Mazda, and replacement for Lincoln vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners. Basic Features: Reset fault /trouble codes / parameter ids (PIDs) Change car configuration data Run tests Services procedures Program certain models Pin Configurations: Switch position one: HS CAN - Occupies pins 6 and 14 Switch position two: MS CAN - Occupies pins 3 and 11 Supported Software: FORScan Elmconfig FoCCCus FF2 Plus more Please note that replacement for Ford and replacement for Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. Have been modified to allow it to implement the MS CAN bus. Support HS CAN from the stock, because for Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11. Supported Vehicles: All replacement for Ford, replacement for Mazda, replacement for Lincoln, vehicles that can be addressed using an ELM via an OBDII connector. Supported Protocols: Replacement for FORD HS CAN Replacement for FORD MS CAN