Name : Scimagic-RCOrigin : Mainland ChinaCertification : CEModel Number : Remote Control WISNIOWSKIFor : WISNIOWSKI Garage Door Remote ControlFrequency : 433MHZ 433.92mhzChip : Rolling CodeUsage : Program on receiverVoltage : 12vMaterial : Metal and PVCDistance : 10-50m open spaceSize : 70*33*12mmincluding : Remote Control/Key Chain/English Manual/BatteryCompatible with WISNIOWSKI 433.92MHz Rolling Code Remote Control1.Type of programming: Programming with the receiver2.Number of channels: 43. Code: rolling code4. Frequency: 433.92MHz5.Woring Range: 10-50 m (open space)6.Power supply: 12V 27A7.Remote come with Battery Security of use: dynamic code provides a high level of security, non-copyable code.Disclaimer:Your Old remote must be same as the advertisement , new remote do not compatible with other remotes .WISNIOWSKI Remote Programming:Program to Gate / Garage Door Openers the same way as original WISNIOWSKI remotes,please refer to your receiver's user manual.Materials required for programming: your receiver 1.Open your receiver from the garage door.2.Press the programming button. Inscription is usually: ENR, MEMO or PROG.3.On some receivers, it is necessary to hold down the programming button.4..On the receiver the LED indicates the start of the programming mode.5.Press for one second on a button on the new remote control and let it go again.6.The LED of the receiver will light differently or goes out to indicate a successful programming.7.Wait a few seconds to exit the programming mode.8.Congratulations Your new remote control is programmed IncludeRemote ControlBatteryKeychainEnglish Manual