ICL8038 Signal Generator Medium/Low Signal Frequency 10Hz-450KHz Triangular/Rectangular/Sine Wave Generator Module_DJ

The LC ICL8038 module is designed for common frequency ranges. It is adjustable from 5 gears and generates low-distortion triangular waves, square and sine waves from 10Hz to 450KHz. Sine wave can be used for test signals, drive signals, carrier frequency signals, etc square wave can be used for switching signals, trigger signals, etc triangular wave is mainly used for scanning signals. Working voltage: 12V - 15V Output: Triangular wave, Square wave and sine wave. Frequency range: 10HZ - 450kHz Low distortion sine wave: 1 percent Duty cycle range: 2 percent to 98 percent Low temperature drift: 50ppm or ° Triangular wave output linearity: 0.1 percent Working temperature: 0 - 70 ℃ Board size: 54.5 x 37.8mm Functions: VCC,GND: working voltage AC: with DC bias output G: ground DC: pure signal output R11: Frequency adjustment R12: Square wave duty cycle adjustment R13: Sine wave linear adjustment R14: Amplitude adjustment R15: Square wave linear adjustment Jumper P2: select different waveforms(triangular, square or sine waves) Jumper P3: select different frequency ranges 10Hz-450Hz 90Hz-1.5KHz 940Hz-15KHz 6KHz-120KHz 20KHz-450KHz (Slight differences in parts not affect use) Color: As Shown Material: ABS Package Contents: 1 x ICL8038 Signal Generator Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.