New Arrival for BMW INPA K+CAN with FT232RL Chip and Switch, compatible with BMW vehicles featuring an 8-pin connector and K-Line protocol. USB OBD2 interface for BMW - supports INPA/Ediabas and K+DCAN, enabling full diagnostic functionality for BMW models from 1998 to 2013 (all functions equivalent to OEM interfaces). Built-in K and D-CAN lines. INPA K+CAN for BMW Features: 1. Read and clear fault codes 2. Perform adaptations 3. Driver programming 4. Apply coding 5. Additional diagnostic functions Supported Protocols: 1. High-speed D-CAN and PT-CAN (500 kbit/s) 2. Low-speed K-CAN (100 kbit/s) 3. Standard BMW OBD protocol Compatible with D-CAN for: 1. E60, E61 from 03/2007 2. E83 from 09/2006 3. E81, E87 from 03/2007 4. E90, E91, E92, E93 from 03/2007 5. E70 (new model X5) 6. R56 (new model MINI) PT-CAN and K-CAN – fully switchable CAN speed allows diagnostics without vehicle connection. Supports BMW OBD Interface for older models: - From 1995 to 1998 (K-Line not required) - From 1998 to 03/2013 (all models) Package Includes: 1 x K+CAN for BMW INPA Cable with Switch 1 x CD with Drivers