For Insta360 X4 AMagisn Metal Protective Housing Frame 2 Claws Rabbit Cage 1. Suitable for Insta360 X4 metal protective frame + lens cover set. Compatible with 14-inch threaded interface, the dual cold shoe openings are widely expandable and can be connected to external fill lights, microphones, selfie sticks, etc. 2. Magnetic foldable 2-claw interface, strong applicability, quick disassembly and assembly, simple and easy to use 3. A 14-inch threaded hole is reserved on the side of the rabbit cage, which can not only expand accessories, but also allow the X4 to be installed horizontally, lowering the center of gravity and enabling horizontal shooting. 4. The battery slot has a complete opening. You can directly replace the battery and insert and remove the Micro SD card without dismantling the rabbit cage, which is convenient and fast. 5. There are soft foams on the top and bottom of the rabbit cage. After the camera is installed, it can be firmly fixed. 6. Use rubber rings to enhance screw damping. The screws will not loosen when riding motorcycles and bicycles, and there is no need to worry about the camera falling off the frame. 7. Material: aluminum alloy 8. Dimensions: 135.1 × 55.8 × 23.0 mm 9. Weight: 43g packing list: Metal rabbit cage x 1 Lens protective case x 1