Feature:1. DC electromagnets are mainly used in vending machines, transportation equipment, office facilities, household appliances, machinery, etc.2. Easy installation with female thread mounting holes.3. Tinned copper wire, anti-oxidation, lower resistance.4. Low friction ensures high efficiency and long service life.5. Made of high quality electronic components, stable and reliable performance.Specification:Item Type: Push-Pull Type DC ElectromagnetSuction: 25N Product Model: JF-1040BStroke: Approx. 15mm / 0.6inVoltage: 24VDCCurrent: 400mAProduct Weight: 137 g / 4.8 oz(approx.)Operating Conditions:1. Operating Temperature: Between -5 C and 40 C solenoid valve will not solidify2. Operating Humidity: Relative humidity between 45% and 85% solenoid valve will not solidify3. Storage Temperature: Between -40 C and 75 C solenoid valve will not solidify4. Storage Humidity: Relative humidity between 0% and 95% solenoid valve will not solidifyPerformance Requirements:Temperature Rise: 65 or less (level A) Life: 1million cycles or more under loadTest Environment:1. Ambient Temperature: 232C2. Relative Humidity: 5010%3. Atmospheric Pressure: 1013MPa4. Insulation Resistance: When measuring with 500VDC insulation resistor, the insulation resistance between the coil and the yoke must be at least 100M.5. Insulation Strength: The insulation strength between the coil and the yoke should be at least 600VAC/1 minute.Package List:1 x DC Electromagnet