PROFESSIONAL WIRELESS REVERSING KIT MONITOR + REVERSING CAMERA 12V / 24V Perfect set for cars / buses / trucks / tractors / combines / campers / trailers / machines / forklifts FULL WIRELESS REVERSE KIT The reversing kit is an indispensable tool that helps when driving on crowded city streets, parking by the "touch" method or when performing a reversing maneuver in the dark. Thanks to the offered set, you will be able to avoid unpleasant events such as minor bumps / cuts, etc. The whole is connected wirelessly with a range of up to 50m and can operate on a 12 / 24V power supply. PROFESSIONAL WIRELESS SINGLE CAMERA REVERSE KIT AT A GLANCE: Professional 12 / 24V reversing camera with built-in wireless module Professional monitor for 4 channels with a built-in 12 / 24V wireless module Camera with IR LEDs - sees in the dark Waterproof and dustproof camera The range of the camera is up to 50m from the monitor Remote control for the monitor Automatic monitor switch- on (activator) The ability to mirror / rotate the image on the monitor Possibility to connect an additional VIDEO signal to the second monitor channel PROFESSIONAL 12 / 24V MONITOR WITH BUILT-IN WIRELESS MODULE The monitor is turned on automatically when reverse gear is engaged. This is due to the trigger cable - after connecting it, e.g. to the beam of reversing lights - the monitor will automatically turn on when reverse gear is engaged. The monitor supports 4 independent frequencies - it can be connected with up to 4 wireless cameras (one included). For each frequency, the monitor has an activation cable - you can connect the set to fully automate the display of the preview from cameras, e.g. the camera on the right with the turn signal turned on to the right and the second camera analogically to the left side. The LCD monitor is mounted using a leg with an adhesive tape. The assembly is very simple and does not require much intervention in the car . The leg is adjustable. The built-in receiver ensures that the video signal is received from the rear view camera included in the set. WIRELESS REAR CAMERA WITH A RANGE OF UP TO 50M, POWERED BY 12 / 24V - 1 PIECE IN THE SET CAMERA WITH SHARP TRANSDUCER! The reversing camera will be perfect for passenger cars, vans as well as buses, trucks and other vehicles. Thanks to the built-in infrared diodes, the camera will work in poor lighting conditions. IR LEDs will illuminate the area behind the camera up to 20m - the reversing / parking maneuver will be much easier. Built-in 2.4Ghz video transmitters guarantee wireless transmission of the image to the monitor without interference at a distance of up to 50m. The camera and monitor are equipped with internal transmitting and receiving modules, which makes the set more user-friendly. EXAMPLE OF WIRELESS CAMERA INSTALLATION WITH MONITOR - 12 / 24V POWER SUPPLY POSSIBLE THE RANGE OF THE CAMERA IS UP TO 50M Monitor Specifications: Built-in wireless two-channel receiver: YES - 2.4GHz Smooth adjustment of brightness - color - contrast: YES Remote control: remote control included AV input: YES Display format: 16: 9 Resolution: 800x480 px External dimensions of the monitor: 180 x 120 x 22mm PAL / NTSC system: automatic Power supply: 12V-24V Camera technical data: Built-in wireless transmitter: YES Weatherproof: YES, waterproof IP68 Rotated - the ability to adjust the viewing angles vertically Transducer: 1/4 Sharp CCD Resolution: 510x582 px Horizontal Resolution: 420 lines Dusk sensor and IR diodes: YES, 18xIR, lighting up to 20m Minimum illumination: 0 LUX (0 LUX / LED ON) Camera external dimensions: 70 x 55 x 44mm Lens angle: 120 ° Working temperature: -20 ° C - + 70 ° C Power supply: 12V-24V SET CONTAINS 12 / 24V wireless LCD monitor 12 / 24V wireless reversing camera Stand holder with adjustment 2x Power cord 2x Antenna Remote control User manual