Features Convenient Conversion: The K type thermocouple module can convert ambient temperature into temperature compensation voltage through internal temperature detection diode. Long Service Life: The K type thermocouple probe has simple structure, anti-interference, small error and long service life. K-type thermocouple temperature probe sensor has enough quantity and length to meet your daily needs. Multifunction: The K type thermocouple probe has 12 bit analog / digital thermocouple converter, cold end compensation sensing and calibration, digital controller, 1 SPI compatible interface and 1 related logic control. High accuracy: The T and t inputs are connected to the low noise amplifier A1 to ensure the high accuracy of the detection input, while isolating the thermocouple connection wire from the interference source. Signal Conditioning Amplifier: there is a signal conditioning amplifier inside the K-type thermocouple module, which can convert the thermocouple signal into a voltage compatible with the ADC input channel. Specification: Item Type: K Type Thermocouple Module Material: PlasticModel: MAX31855Input Voltage: 3-5V DC Size: Approx. 20.3 x 20.3mm/0.8 x 0.8in Positioning Hole Spacing: Approx. 15mm/0.6in Positioning Hole Diameter: Approx. 2mm/0.08in Package List:1 x K Type Thermocouple Module Note: 1. The module does not included the thermocouple probe and needs to be purchased separately. 2. Only applicable for MKS SBASE, NOT suitable for other 2560 series motherboards. Package List 1 x K Type Thermocouple Module