Power supply:DC10V--30V Standby current:40mA Fingerprint capacity:200 pieces Relay Function: 1-20 second or Self-locking Mode(Finger passed-relay closed,finger passed again-relay opened) Instructions for K215-V1.3 control board: 1. Register Fingerprint: SET button shortly,system in register state and blue indicator light flash fast, place your finger in area, fingerprint register successful when hearing music;Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds. 2. When back to factory default, SET button until hear "Di" and music,means initialization operation successful. 3. Mode Selection Usage: when chose 2, operating time of the relay is 1s-20s after pass fingerprint,can adjust by knob. When chose 1, relay operated when fingerprint passed, and then relay released when fingerprint passed again, relay operated and released circularly. Relay released when power off. Note:In factory status, any fingerprint can pass, after register fingerprints, this function is invalid R503 Upgrade to waterproof version, waterproof level: IP65 When the temperature of the use environment fluctuates greatly, it may affect the glue, thus affecting the waterproof effect. colour: silver Material: metal Package Contents: 10 x K215 Control Board 10 x R503 Fingerprint Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.