Power supply:DC10V--30V Standby current:40mA Fingerprint capacity:200 pieces Relay Function: 1-20 second or Self-locking Mode(Finger passed-relay closed,finger passed again-relay opened) You can dowload K215-V1.3 manual from the following website: https://.dropbox.//9itshhkx0r9mdyt/AABPH-Dhleve3A1Mn5ZA34pCa?dl=0; You can download the R503 manual from this website link: https://.dropbox.//epucei8lmoz7xpp/AAAmon04b1DiSOeh1q4nAhzAa?dl=0; K215-V1.2 fingerprint control board video on :https://.be/1Zk2bjRdRpg; K215-V1.2+R503 register fingerprint video on :https://.be/_kFsBPBsgU4 Instructions for K215-V1.3 control board: 1. Register Fingerprint: Press SET button shortly,system in register state and blue indicator light flash fast, place your finger in area, fingerprint register successful when hearing music;Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, a few seconds. 2. When back to factory default, press SET button until hear "Di" and music,means initialization operation successful. 3. Mode Usage: when chose 2, operating time of the relay is 1s-20s after pass fingerprint,can adjust by knob. When chose 1, relay operated when fingerprint passed, and then relay released when fingerprint passed again, relay operated and released circularly. Relay released when power off. Note:In factory status, any fingerprint can pass, after register , this function is invalid R503 Upgrade to waterproof version, waterproof level: IP65 When the temperature of the use environment fluctuates greatly, it may affect the glue, thus affecting the waterproof effect. colour: silver Material: metal Package Contents: 1 x K215 Control Board 1 x R503Fingerprint Module Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.