100% Factory tested. Please confirm the part number before purchase. There may be differences in model and application year across different markets. This is an aftermarket replacement item and is not genuine. Part number: 25210-JE20A, 25210JE20A Compatible with: - Tiida 2005–2010 - Geniss Livina 2005–2012 - Micra K12 2004–2009 How to Replace a Faulty Window Switch: Step 1: Disconnect the negative battery terminal before working on the switch to prevent short circuits. Step 2: Unclip the handles using a screwdriver. Lift the faulty switch out of its harness. If you prefer not to remove the door casing or door handle, insert a flat-head screwdriver under the switch bezel and gently pry until it loosens to access the housing. Step 3: Once the switch is removed from the bezel, disconnect it from the wire harness and detach it from the outlet. Remove the rockers before inserting the new switch into the harness holes. Step 4: Assemble the rockers into the switch and snap the device into the bezel. Note: Installation instructions are not included. Professional installation is highly recommended. Please verify compatibility to ensure the item meets your requirements. Tips: Product design may be updated periodically. Due to different production batches, the actual product may have slight variations or color differences, which do not affect functionality. Color: As shown Material: Plastic Package contents: 2 x Button Switch Only the items listed above are included; other products are not included. Note: Lighting reflections and display settings may cause slight color differences between the image and the actual item. Measurement error allowance: ±1–3 cm.