説明
This is a 230V pump You can find this same pump under the part numbers below and brands: Laing / Goulds / ITT (but it's the same pump) 6050U0016, 73979 (Laing), E10-NSHNDNN2W, SM909NHW-14, SM909NHW-18, SM909NHW-26, SM959NHW-26, E10-NSHNSW-20,10-0121-K (Hydro-quip),34-158-1452 (Horizon) by this pump you can also replace 6000-125,6509, 692, 6921, 69750, 733886739794, 73979, E10-NSHN2W-20, LHB07100138 _ Technical informations:Connection: 3/4" x2 (smooth barb)Weight: 1,6 kgDimensions: 105x124x150mmSpeed: fix 24h, 3.100 rmpPower: max 60W (0,15 Hp)House: PA53 (fixation plate can be disassembled and repositionned)Protection: IP55Max Pressure: 2 barMax flow: 1.500l/h, 3,6m, 15WMax head: 5,7mCurrent: 230V (50/60Hz)Rotation: 3.100 rmpElectrical connector: no connectorCable: 4', 0,5mNoise: less than50 db
-
ブランド:
Unbranded
-
カテゴリー:
スパ
-
色:
60
-
サイズ:
fix
-
Fruugo ID:
421557499-887888819
-
EAN:
9457382122584
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Pump should only be used with liquids compatible with pump component materials. Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in flammable and/or explosive atmospheres
For your protection always wear proper clothing, eye protection, etc. in case of any malfunction. Failure to comply with this warning may result in personal injury and/or property damage.
Ensure that the power source conforms to the requirements of your equipment.
Disconnect power before servicing. If the power disconnect is out of sight, lock in the open position and tag it to prevent unexpected application of power. Failure to do so may result in a fatal electric shock!
Release all pressure within the system before servicing any component. Drain liquids from the system before servicing.
Make workshop childproof with padlocks, master switches and by removing starter keys.
When wiring an electrically driven pump follow all electrical and safety codes, as well as the most recent European or United States National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA). The pump should be connected by a qualified electrician.
Protect electrical cord from sharp objects, hot surfaces, oil, and chemicals. Avoid kinking the cord. Replace or repair damaged or worn cords immediately.
Do not handle a pump or pump motor with wet hands or when standing on a wet or damp surface or in water.
