Description A safety grab bar for the bathtub or shower makes it easier to get in and out and prevents accidents. The safety grab bar is made of plastic. The handle has large suction cups on both ends. These hold perfectly on smooth surfaces, such as tiles. It can therefore be installed without tools, drilling or gluing. The safety grab bar is ideal for your safety in the bathroom, by the toilet, in the shower and bathtub. You can also use the handle as a handle near stairs. Attached in seconds - no drilling required: The two strong suction cups attach the grab bar to a smooth surface. Simply place it on the desired location, close the clamping lever, and you're done. By opening the clamping lever, you can easily and conveniently remove the handle and reattach it elsewhere. The advantages at a glance - attachment without drilling - can be attached and removed in seconds - ideal for shower cubicles, bathtubs, smooth tiles as well as next to the toilet etc. - simple suction cup technology - extra strong hold - approx. 30 cm - 2 pieces Data Material: plastic Length approx. 30.0 cm Suction cup: each approx. 10 cm Dimensions: approx. 30 x 10 x 8cm (LxHxW) Scope of delivery 2x safety handle Note: 1. It is recommended to adsorb on smooth tiles and glass. Wipe the tiles and glass with a damp cloth before use. It can be adsorbed directly without drying; 2. The armrest should be adsorbed again after a short time of adsorption, because after a long time the air slowly penetrates and the suction cup can no longer hold it. 3. Before pressing the locking button, press each of the suction cups so that the suction cups come into better contact with the glass and tiles. 4. If you can't vacuum it the first time because the center part hasn't fully contacted the glass and tiles, please vacuum it several times. After the suction cup has fully contacted the glass and tiles, it can be sucked in.