Feature: 1. PANEL SPECIFICATION: 64x32 full color LED dot matrix display with 2048 RGB LEDs on board, 3mm pitch, supports for RPi, for Pico, for ESP32, etc. 2. SUPPORT CASCADE: RGB LED matrix panel with HUB75 input and output interface reserved, which can cascade multiple LED displays. 3. POWER SUPPLY VOLTAGE: When cascading multiple displays, ensure that each RGB LED display has a power supply of 5V 2.5A or more. 4. WIDELY USED: LED matrix display is applied to store door signs, the side of buses and above the roof of cabs to display animations or video ads. 5. APPLICATION: LED matrix panel is suitable for creators or electronics enthusiasts to learn, or DIY secondary development into other desktop or wall mounted display applications. Specification: Item Type: LED Matrix Panel Model: RGB Matrix P3 64x32 Material: ABS, PCB Resolution: 64x32=2048 DOTS Pixel Pitch: 3mm/0.1in Pixel Composition: 1R1G1B Viewing Angle: ≥160 Degrees Control Mode: Synchronous Control Interface Type: HUB75 Power Supply Voltage: 5V 2.5A (VH4 Socket Input) Power: ≤ 12W Use Scenario: DIY Creator Desktop Or Wall Display Applications, Billboards, Environmental Monitoring Screens, Etc.. Package List: 1 x LED Screen1 x Matrix Screen Panel20 x Double Sided Back Adhesive1 x Flex Cable1 x Power Cable1 x Power Adaptor1 x 16Pin Jump Wire4 x Screws Note: This product is bare screen, need to match with for RPi, for Pico, for ESP32 and other main control boards to display