Key benefits Fast and reliable edge finding: the electronic optical finder locates workpiece edges quickly, reducing setup time on milling machines and jig borers. High-precision measurements: 0.005 mm accuracy delivers repeatable, fine positioning for tight-tolerance machining. Damage protection and longer service life: the probe is spring-loaded to absorb overruns and reduce the risk of accidental breakage. Stable, low-effort operation: the hardened and ground probe does not need to be rotated during measurement, simplifying use and maintaining consistent readings. Main features Shaft diameter: 20 mm — fits tooling and holders designed for a 20 mm shank. Probe diameter: 10 mm — compact probe tip for precise edge contact. Accuracy: 0.005 mm — suitable for high-precision setup and inspection. Probe construction: hardened and ground for durability and stable contact. Safety mechanism: spring-loaded probe to protect against overrun damage. Function: electronic optical edge finder for rapid workpiece locating. Compatibility: suitable for conventional milling machines and integrated machining centers, and effective on jig borers. How it solves common problems Reduces setup time by quickly identifying part edges and reference points, so operators spend less time on manual alignment. Improves finish and dimensional accuracy by enabling precise, repeatable positioning before cutting. Minimizes tool and probe damage thanks to the spring-loaded design that cushions accidental overruns. Removes the need to rotate the probe during measurement, lowering the chance of inconsistent readings. Typical applications Setting and locating workpiece edges on conventional milling machines before roughing or finishing passes. Finding centerlines and hole positions on jig borers for accurate drilling and reaming. Verifying fixture positions and locating features on integrated machining centers during multi-step setups. Specifications Shaft diameter: 20 mm Probe diameter: 10 mm Accuracy: 0.005 mm Probe: hardened and ground; spring-loaded for overrun protection Suitable machines: conventional milling machines, jig borers, integrated machining centers What to expect in use Quick edge detection with repeatable results. Reduced setup time and fewer trial cuts. Durable probe performance under regular shop-floor conditions. Simple integration into standard 20 mm-shank tooling setups.