Linear Hall Current Sensor Module 3-5V PFF-T Detection High Precision Signal Output

The ACS758 consists of a precision, low-offset linear Hall sensor circuit with a copper current path located close to the sensor. Current flowing through the copper path generates a magnetic field detected by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized by positioning the magnetic signal near the Hall sensor. The output voltage is accurate and stable, provided by a chopper-stabilized, low-offset BICMOS IC calibrated for precision. The internal resistance of the current conduction path is typically 100 mΩ, enabling low power loss. The copper conductor is designed to withstand high overcurrent conditions. The conduction path terminals and sensor pins (pins 1 to 3) are electrically isolated. This allows the ACS758 sensor to be used in applications requiring electrical isolation without additional insulators or complex insulation techniques. The ACS758 is fully calibrated prior to shipment. The ACS758 series is lead-free; all pins are plated with 100% matte tin, and no lead is present in the package. Operating voltage: 3 V to 5 V Quiescent output voltage: VCC / 2 Supply current: 135 mA (max) Storage temperature range: -65 °C to +165 °C Maximum output current (IOUT–GND): 3 mA Internal bandwidth: 120 kHz Dimensions: 55 × 21 × 15 mm Material: ABS Color: As shown Package contents: 1 × ACS758 Current Sensor Module Note: Actual product color may vary slightly due to lighting and display differences. Measurement tolerance: ±1–3 cm.