For Lowrance & Simrad 000-0120-37 Yamaha Engine Interface Cable NMEA 2000 (7M) w/;T; Outputs: For Yamaha| 4-stroke 50-250| 2-stroke HDPI 150-350 RPM Yes Alternator Voltage| Yes Engine Hours| Yes Engine Temperature| Yes Fuel Pressure| Yes Fuel Rate| Yes Oil Pressure| Yes Trim *| Yes Water Pressure**| Yes *Digital trim must be connected by you or a Yamaha dealer. **May require addition of pressure sensor depending on engine model 4-pin data connector. For use with a NMEA 2000 network. Works with NMEA 2000-compliant GPS/Chart-Plotting units. Connects directly to the NMEA 2000 connector under the engine's cowling. The boat must have at least a basic NMEA backbone (Starter Kit) installed for the cable to interface with the GPS unit. Connects to Yamaha engines without Yamaha CommandLink Plus system. -2006 & newer: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250. -2006 & newer: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300. Including SHO models as well