: M.2 (NGFF) & mSATA to SATA III Adapter card Support SATA Reversion 3.1 Fully compatible with SATA 3.1 standard Compatible with PCI Express M.2 protocol MSATA Upports full-height and half-height MSATA SSDs M.2(NGFF)Support M.2 SATA SSD(2230 2242 2260 2280) Colour: black Material: plastic Size: 100 x 64mm Package Contents: 1 x SATA III Board Adapter Please note: This adapter card supports msata and SATA protocol m.2 ngffssd, but can not use both hard disks at the same time! Switch to ngff to read m.2 ngff SSD, switch to msata to read msata SSD. The adapter card only converts the interface form and does not change any performance Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. The three interface definitions look exactly the same and cannot be distinguished by the eye, so be to distinguish the interface definitions of your SSD! Matters needing attention: This product supports the SSD defined by msata interface in mini pci-e. msata is not to 1.8-inch -SATA. At the same time, this product also supports the conversion of solid-state with m.2 ngff SATA protocol to 2.5-inch SATA interface. However, the two kinds of hard disks cannot be used at the same time. If you insert two kinds of hard disks at the same time, you can only read one of There are three pin definitions for the mini PCI-E interface SSD. One is called msata, which is often found on and thinpad machines, and can also be called defined interface; the other is called SATA Mini PCI-E, which is commonly seen in and some tablet computers, also known as defined interface; and the other is defined by PATA, which is an IDE interface in essence, which is commonly seen in Mini 9. Wait for the machine. The m.2 ngff SSD has three protocols: SATA protocol, nvme PCIe x2 protocol and nvme PCIe X4 protocol. This adapter card only supports the SATA protocol.