Description: The nvme m2 to usb3.1 m2 to usb3.0 hard drive box is designed to be directly plugged into the bare board, so there is no need to worry about heat dissipation. This is a bare card design without a casing. USB card computers save the trouble of removing the casing and wiring. Since NVME's SSD generates a lot of heat when working, the bare card design can dissipate heat more effectively. 1. M.2 NVME SSD to USB adapter, no cable required. Used as a portable SSD. 2. High-performance 10Gbps USB3.1 Gen 2 bridge chip, retrieval and backup of data at high speed. 3. Hot-swappable, plug-and-play, no driver required. Suitable for Samsung 970 series/960 series/WD Black/Intel/Crucial NVME SSD. 4. No case cover is required to fully utilize the high performance of SSD Specifications: Specifications: Applicable: Suitable for NVMe M.2 interface 2242/2260/2280 SSD (M.2 NVMe does not support PCIE AHCI and SATA protocols) Output: USB-A Color : Black chip: JMS583 Package contains: 1*M.2 NVME SSD to USB 3.1 adapter 1* screwdriver Notes: Warm reminder: 1. Hard drive enclosure only, SSD hard drive not included. 2. Only supports NVMe PCI-E M.2 M-Key SSD. (SATA-based B-Key M.2 SSD and AHCI-based PCI-E M.2 SSD are not supported)