Magnetic Encoder Module MT6701 14bit 2 Set

This is a magnetic angle encoder module based on the MT6701 chip that adopts the differential Hall sensing principle. The chip senses the magnetic field component perpendicular to its surface when the 1-pair pole radial magnet mounted above rotates, and outputs angle signals ranging from 0 to 360 °. Features: 1. Delivers absolute angle measurement from 0 ° to 360 ° using differential Hall technology. 2. Working voltage is 3.3 V to 5.0 V, operating temperature ranges from -40 °C to 125 °C. 3. Typical linear deviation is less than ± 1 °, full temperature range deviation is less than ± 1.5 °. 4. System delay is as low as 5 microseconds, supports speeds up to 55000 rpm. 5. Includes I2C interface to read 14-bit internal angle data. 6. Incremental ABZ output supports any resolution from 1 to 1024 lines. 7. Incremental UVW output supports any polarity from 1 to 16. 8. Provides 12-bit PWM output or 12-bit analog output. 9. Dedicated detection output senses distance changes between magnet and chip to enable single chip rotary button function. 10. Built-in EEPROM supports up to 1000 programming repetitions. Specifications: 2 sets, colour black, material PCB. Package contents: 2 x Magnetic Encoder, 2 x Magnet, 2 x pin. Pins are of random colour, requests for specified colours are not accepted. Note: Light reflection and different displays may cause slight colour difference between the pictured item and the real product. Allowable measurement error is +/- 1 to 3 cm.