Item Type: Automatic Tool Sensor _x000D_ Test Speed: 50-200mm/min_x000D_ Service Life: 3 million times_x000D_ Maximum Diameter: Approx. 0.5mm / 0.02in /20mm / 0.79in _x000D_ Total Height: Approx. 65mm / 2.6in_x000D_ Total Stroke: Approx. 8mm / 0.3in_x000D_ Default Form: NC normally closed type/NO normally open type_x000D_ Voltage Range: 10-30V DC_x000D_ Rated Voltage: DC24V10%, 20mA (maximum)_x000D_ Blowing Function: Yes_x000D_ Whether To Bring The Indicator Light: Yes (open when normally closed)_x000D_ Protection Level: IP67 x 100% waterproof, oil-proof sealing performance_x000D_ Optional Output Mode: NO/NC_x000D_ Itinerary: 5_x000D_ Repeat Accuracy: 0.002 (Condition: Operating speed 50-200mm/min)_x000D_ Protection Structure: IP67_x000D_ Contact Force: 1.5N (the installation state must be vertical)_x000D_ Tool Surface Material: Super hard alloy_x000D_ Surface Treatment: Mirror polishing 4S_x000D_ Contact Rating: DC24V 20mA (maximum) recommended value 10mA resistance load_x000D_ Cable Specifications: Standard 1.8m oil resistant_x000D_ Cable Sheath: Approx.8mm / 0.3in 304 stainless steel_x000D_ Output Mode: B: NC (emergency stop when the signal is disconnected)_x000D_ Contact Voltage: DC24V 20mA resistance load (in special cases, load and current limit must be added)_x000D_ Scope of Application: Mainly used in engraving machine