1. It is especially friendly to makers using Klipper. The board is a motherboard with integrated dual cores. One core can be installed with traditional 3D printer firmware (), while the other core is installed on the core board and can run Klipper firmware2. It is also very friendly for novice users who want to use Klipper for the first time. You can directly use a motherboard to achieve the functions you want.IntroductionMANTA M8P 2.0:Microprocessor:ARM M7 STM32H723ZET6 550MHzGigabit Ethernet interface (1000M for CM4, 100M for CB1)3 USB 2.0 portsEquipping the ESD protection chip on the USB and Ethernet ports to prevent being broken down by the static electricityWhen working with CM4, its 40pin pin header has the same function as that of (Custom IO for CB1)Using a BTB boardtoboard connection, which can be further reinforced with screws, perfectly compatible with CB1 or CM4Colour:BlackMaterial:PCB+electronic componentsPackage Contents:1 x Manta M8P V2.0 MotherboardOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/ 13cm.