Manual Leather Peeling Machine for Vegetable Tanned and Thick Leather Product overview A fully manual peeling tool designed for thinning and skiving vegetable tanned and other firm leathers. The operator pulls the peelable leather through the blade for controlled, consistent thinning without motors or complex mechanisms. Key benefits Precise manual control: Operatordriven peeling lets you control feed speed and pressure for consistent results on firm leathers. Versatile peeling angles: Adjustment screws on both sides allow quick setup for flat peeling or oblique peeling to match the desired bevel or taper. Durable cutting edge: quality stainless steel knife offers robust construction and long service life for workshop use. Simple and reliable: Mechanical simplicity means fewer parts to maintain and no need for power, suitable for small shops and hobbyists. Compatibility and limits Designed for vegetable tanned leather, harness leather, belt leather, hard leather, and other thick leathers. Maximum workable width: less than 8 cm. Not suitable for ultrasoft or ultrathin leathers, and not intended as a substitute for tools used in handmade leather processing workshops that require specialized softleather handling. Key features Fully manual operation requiring the user to pull the material through the blade. Twoside adjustment screws for easy switching between flat and oblique skiving. Stainless steel blade for durability and consistent edge retention. Compact, simple construction with no motors or electronic parts. Use scenarios Belt making: Thin the ends and edges of vegetable tanned belts to prepare for buckle fitting and edge finishing. Harness and strap work: Skive harness straps and thick leather components to reduce bulk at joints and improve stitching profiles. Small leather goods and repairs: Trim and taper thick leather parts for bag straps, watch straps, and patches where a controlled bevel is needed. Practical notes for users results with firm, vegetable tanned leathers within the specified width limit. Adjust the side screws to set the angle and depth of cut before starting; practice on scrap pieces to dial in settings. Keep the blade sharp and clean to maintain cutting quality and prolong service life. This manual peeling machine provides a straightforward, durable solution for thinning firm leathers where precise, handson control is required.