Single channel USB to serial/parallel ports with a variety of configurations.<br> Entire USB protocol handled on the chip, requiring no USB specific firmware programming.<br> USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.<br> Multi-Protocol Synchronous Serial Engine (MPSSE) simplifies synchronous serial protocol design.<br> UART transfer data rate up to 12Mbaud, with USB to asynchronous 245 FIFO mode for transfer rates up to 8 Mbyte/Sec and synchronous 245 parallel FIFO mode for transfers up to 40 Mbytes/Sec.<br> FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).<br> Color: As Shown<br> Material: PCB<br> Package Contents:<br> 1*Module<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.