[Applicable models]This Water Landing Gear is suitable for Mini 3 Pro/mini 3 [Water Landing]Use Water Landing Gear to make your for Mini 3 Pro/mini 3 on the water Landing or taking off,Take a video on the water and let you have more fun flying (before using it on the water, make sure not to go where there are waves, otherwise there is a danger of overturning.) [Effective protection]The water landing gear can also be used as a landing gear, which can increase the distance between the for Mini 3 Pro/mini 3 and the ground by 45mm, effectively improving the ability of the for Mini 3 Pro/mini 3 to adapt to the ground environment during take-off and landing.It can avoid damage to the drone due to collision with the ground during take-off or landing [Non-destructive installation]The installation and disassembly are simple, no additional tools are needed, and the for Mini 3 Pro/mini 3 not be damaged. First, fix the upper bracket above the for Mini 3 Pro/mini 3, and fix the lower bracket below the for Mini 3 Pro/mini 3, then align and tighten with the attached screws, and then Put the buoyancy rod into the lower bracket and adjust the position [Excellent material]Made of high-quality Plastic and sponge, it has the characteristics of durability and strong bearing capacity, and the design not burden the flight. Color: As Shown Material: Plastic + Sponge Package Contents: 2 x buoyancy bars 2 x tripods 4 x elastic straps Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.