Feature: 1. Measuring Tool: The mini digital tweezers is a portable LCR tester, which automatically identifies the type of electronic components and actively selects the appropriate range for measurement. 2. Signal Generator: The intelligent tweezers has built in signal generator, which can output a variety of signals to meet the needs of electronic system debugging and maintenance. 3. 3 Section Structure: Can be divided into controller, measuring arm and camera head, which can be flexibly replaced and combined, with simple operation and accurate measurement. 4. Measurable Values: Thickened gold plated tweezers can measure resistance, capacitance, inductance, voltage, frequency, diode and other devices to quickly identify components. 5. Applicable Scenes: Applicable to the debugging and maintenance of electronic system, classified detection of discrete patch components and other scenarios, convenient and practical. Specification: Item Type: Digital Tweezers Material: ABS Battery: 2 x Lithium Battery, Capacity: 50mAh (25mAh x 2) (built in battery) Charging Time: 2 Hours Continuous Working Time: 10 Hours. Package List: 1 x Digital Tweezers1 x Controller2 x Tweezer Heads1 x User Manual1 x Charging Cable1 x Data Transmission Cord1 x Storage Box Note: 1. Please use the power adapter with output of 5V to charge2. Before connecting and disconnecting the tweezers head, please power off the circuit to be measured, and then power on the measurement after the connection is correct;3. When the product is not in use, it is recommended to pull out the controller;4. To avoid fire or electric shock, please observe all terminal ratings and marking instructions to avoid damage to the machine. Before connecting the product, please consult the product manual or product label for information about the rating:5. After the power is connected, do not touch the exposed connectors and components. Do not use the product if it is suspected that it is faulty. Please contact the after sales department for inspection, maintenance, adjustment or parts replacement:6. Static electricity may cause product damage, and measurement shall be carried out in the antistatic area as far as possible. Before the product is connected to the equipment under test, its internal and external conductors should be grounded briefly to release static electricity.7. Please keep the product surface clean and dry, and do not operate in wet, flammable and explosive environment.8. Do not disassemble the controller or test arm shell of the mini digital tweezers without permission. Once removed, it will not be repaired 9. Please fully plug the controller into the 3.5mm audio socket of the measuring arm before use, and the display screen will enter the use interface after normal display