Automatic OTDR test function:Just set the wavelength and measurement time, and others The parameters are automatically selected by the instrument, and the test can be completedRJ45 line seeking/line sequence/ line length function:Line sequence measurement, Line length measurementSC FC Two port universalDifferent interfaces can be replaced, and the operation is simple and practical1.VFL Red light source interface(2.5mm currency SC/FC/ST) 2.OTDR/Stable light source interface(Can be replaced at will SC/UPC, FC/UPC) 3.OPM Optical power meter interface(2.5mm currency SC/FC/ST) 4.LED lamp FlashlightIntroduction to some functions:1.Auto OTDR: it only needs to set the wavelength and measurement time, and other parameters are automat-ically selected by the instrument to complete the test.2.Expert OTDR: parameters such as wavelength, test range and pulse width shall be set.Curve: The curve and event list are displayed at onceList: Link results are summarized to a list Event Map: Switch to event icon display modeFastSave: Save current curve file quicklyFastSet: Enter parameter setting interface3.Event MapThe function is fully one key automatic test, and the information such as the length of the optical fiber link tobe measured,the type of the joint and the position of the breakpoint are displayed graphically, and the results are clear and easy to understand.4.OPMIt is used for signal power test and insertion loss test of various equipment and photoelectric components.It can identify and measure the power of 270/330/1k/ 2kHz frequency laser.5.VFLOpen: turn on the VFL and output in continuous mode1Hz: VFL flashes at 1Hz 2Hz: VFL flashes at 2Hz frequencyClose: turn off VFL6.Laser SourceAbbreviations:LSThere are five working modes: CW, 270Hz, 330Hz, 1kHz2kHz7.File OperationAll the test curves are saved in the standard SD card of the instrument. Press [File] to enter the file operation interface. You can open, delete and rename files.Note: End face detection needs to purchase accessories separately to use this functionInclusion:OTDR Host+Test report+Instructions+warranty card+Certificate+SC Adapter +FC Adapter(Installed on the machine)+Clean cotton+RJ45 Receiving instrument +RJ45 remote adapter+Data line +Charging head+8G memory card+Portable package+Packing box