1. Comply with SAS2.1 and SAS3.0 industry standard signal specifications. 2. Meet the signal bandwidth requirements of 6Gbs supporting up to 12Gbs 3. 36-pin high-density connector, compatible metal housing for shielding external connections for HD SAS external implementations Connect. 4. Double the SAS port density. 5. The wire uses 28AWG silver-plated conductor for stable transmission. Withstand voltage: 300V DC/0.1 SEC Insulation impedance: 10M Ohm minimum Conduction impedance: 3 Ohm Max Products must be 100% open circuit, short circuit and contact test Working current: 0.5A contact current Operating voltage: 30V AC relief voltage Low power contact impedance: 80Mohm Max Insertion force: 55.5N Max Operating temperature: -20℃-85℃ When removing an interface, pull the blue pull ring to avoid damage to the interface Colour:As Shown Material:Plastic Package Contents: 1 * cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.