OEM LCD Screen for Motorola Moto G13 G23 with Digitizer Full Assembly Before Installation Notes: 1. Test before installation. When testing, do not remove any protective film or tags. Pay attention to static electricity. Before attempting any repair, be sure to ground yourself using an ESD (electrostatic discharge) strap to prevent static damage to internal electronic components. Wear eye protection and handle with care to avoid injury from glass fragments. 2. Screen replacement is a fragile product. Testing before installation is strongly recommended. Perform a simulation test by connecting the motherboard, LCD, or screen, along with the o cable and new replacement, power on the device, and complete the test. If the test is successful, proceed with installation. If there is no display, contact the seller immediately. Do not force installation. The seller is not responsible after the screen has been installed. 3. Avoid over-bending the LCD cable. Bending beyond 90 degrees may result in a black display. Product Information: 1. Replacement LCD display and touch screen digitizer assembly for Motorola Moto G13 G23 2. Replaces broken or non-functional screens 3. Restores device appearance and functionality 4. Designed for precise fit and full compatibility 5. Each unit is inspected and confirmed in good condition prior to shipping 6. Professional installation is highly recommended. The seller assumes no responsibility after installation