Based on differential Hall technology, absolute Angle measurement from 0°-360° is provided Operating voltage 3.3-5.0V, operating temperature -40℃-125℃ Typical linearity deviation Less than ±1°, Less than ±1.5° over the whole temperature range System delay is as low as 5us and can support speeds up to 55,000 RPM Provides I²C/SSI interface to read 14-bit Angle data inside the chip Incremental output ABZ supports any resolution of 1 to 1024 lines Incremental output The UVW supports any polarity from 1 to 16 Provides 12-bit PWM output or analog output (12-bit DAC) Dedicated press detection output (sensing changes in magnet and chip spacing) for single-chip button applications Built-in EEPROM, Greater than 1000 iterations of programming Color: Black Material: PCB Package Contents: 1 x Magnetic encoder 1 x Magnet Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.