Features: <br>Made of aluminum, brass and stainless steel material, it is extremely durable. <br>There is a 2-point screw hole on the top for easy installation to other equipment. <br>A built-in check valve protects your shunt and prevents gas backflow. <br>Run multiple lines from one CO2 source. The distributor allows you to split gas supply into multiple lines. Each line has its own shutoff valve. <br> <br>Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.) <br> <br> <br> <br>Specification: <br>Barbed specifications: 7mm. <br>Material: Stainless steel, aluminum <br>Color: Silver <br>Size: 240 x 90 x 30mm / 9.45 x 3.54 x 1.18 inch (appr.) <br> <br> <br> <br>Package List: <br>1 x 4 Way Beer Splitter<br>1、Made of aluminum, brass and stainless steel material, it is extremely durable. <br>2、There is a 2-point screw hole on the top for easy installation to other equipment. <br>3、A built-in check valve protects your shunt and prevents gas backflow. <br>4、Run multiple lines from one CO2 source. The distributor allows you to split gas supply into multiple lines. Each line has its own shutoff valve. <br>5、Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.