Serial Port SD Memory Card Adapter for running homebrew software on a console. Installs underneath the console behind the hatch marked serial port 2. Enables the use of SD cards with capacities greater than 2GB (SD card not included). Use an SD memory card and run custom homebrew software on your () or by using this SD to serial port adapter. The adapter bypasses the limitations of memory card adapters and allows the use of memory cards larger than 2GB. The maximum capacity of memory cards that can be used is dictated by the software being used, currently this is up to 512GB for Swiss, but note that only certain memory cards are compatible with Swiss and you should check online if your memory card will work. Note: 1-Directly replaces the back cover on port 2 2-Memory card and Swiss Boot Disc are not included, this is only an adapter. 3-Before purchasing, please make sure that your for NGC has a serial port 2 port and that you can start the latest software above. (for NGC XENO). V 0.6 CD boot disk: Type: NTSC-U version machine use Material: PCB color: black Package Contents: 1 x SD2SP2 PRO Adapter 1 x CD boot disk Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The allowable measurement error is 1-3 cm.