1. M.2 NVME to USB3.1 Type-A in-line hard drive enclosure 2. JMS583 TYPEC 3.1 chip, support mainstream nvme pcie m2 hard drive on the market 3. USB3.1 Type-A direct plug-in interface is downward compatible with USB3.0 USB2.0 interface (supports USB2.0 and 3.0 interfaces, of course, you can run 2.0 to 3.0 and then 3.0 to run 3.0) 4. 1000MB/s (This data is for reference only) The actual reading speed is mainly related to the SSD and the device. The test results of the same device are different for different SSDs. 5. Support M.2 NVME protocol solid state drive, only support PCIe x2 and PCIe x4 NVME protocol M.2 NGFF SSD, do not support PCIe x2 and PCIe x4 AHCI protocol M.2 NGFF SSD, do not support B+M key SATA protocol M.2 NGFF SSD Support 2230, 2242 specifications, other lengths are not supported netic suction protective cover, embedded powerful net, can better protect the interface Product name:NVME to USB3.1 Hard Disk Box Transmission speed:10Gbps (maximum) USB:USB3.1 Product weight:about 48g Colour:A:Black Material:Aluminum alloy Size:80x21x9mm Package Contents: 1 x SSD M2 NVME to USB Adapter 1 x Heat Dissipation Silicone Patch 1 x Screw Kit 1 x Screwdriver Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.