For OnePlus 11 TFT LCD Screen with Digitizer Full Assembly Note: This assembly does not support fingerprint identification. Before Installation – Important Tips: 1. Test before installation. Do not remove any protective film or tags during testing. Be aware of static electricity risks. Before attempting repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to internal electronic components. Wear eye protection and handle carefully to avoid injury from glass shards. 2. Screen replacement is fragile. We strongly recommend testing before full installation. For testing, disconnect the phone’s motherboard and connect only the LCD/screen assembly and audio cable to power on and verify functionality. If the display works correctly, proceed with installation. If no display appears, immediately. Do not force installation. We are not responsible for issues arising after installation. 3. Avoid over-bending the LCD cable. Bending beyond 90 degrees may cause black screen or display failure. Product Features: 1. Replacement LCD display + touch screen digitizer assembly for OnePlus 11 2. Replace your broken or non-functional screen with a new unit 3. Restore your device’s appearance and functionality 4. Precise fit and full compatibility 5. Each unit is inspected and tested before shipment 6. Professional installation is highly recommended. We are not responsible for damage or issues after installation. 7. Note: Fingerprint identification is not supported. 8. Color may vary slightly due to lighting and screen settings. Minor dimensional variations may occur due to manual measurement.