Ouitble DC Current Voltage Tester Voltmeter Ammeter DC Digital Display Tester, Multi-Function LCD Current Meter Detector

Features Comprehensive electrical parameter measurement: Measure voltage, current, power, and electric quantity, providing precise and comprehensive data for electrical appliances. Voltage alarm with backlight and power flicker prompt: Stay informed of overvoltage situations with a clear visual and audible alert, ensuring the safety of your electrical devices. Power button reset function for poor light environments: Designed with a convenient power button reset feature, ensuring easy operation in low-light conditions. Power-off data saving: Prevents data loss during power outages, ensuring that important readings are preserved for future reference. Large-screen LCD with full display function: Provides a clear and complete view of voltage, current, power, and energy simultaneously, enhancing usability and convenience. Specification: Condition: Brand New Item Type: DC Current Voltage Meter Material: ABS Working Voltage: 6.5~100VDC Test Voltage: 6.5~100VDC Rated Power: 20A / 2000W Measurement Accuracy: Level 1.0 Display and Button Display Interface: The large LCD screen displays the voltage, current, power and power parameters simultaneously. Display Format: 1. Power: Test range 0~2kW The display format within 1kW is 0.0~999.9W; The display format above 1kW is 1000~2000W. 2. Electricity: Test range 0~9999kWh The display format within 10kWh is 0~9999Wh; The display format above 10kWh is 10~9999kWh; 3. Voltage: Test range 6.5~100V Display format 6.50~99.99V 4. Current: Test range 0~20A The display format is 0.00~20.00 Button: 1. Control of the backlight The backlight can be turned on or off by short pressing the button, and the poor light state is automatically saved when the power is turned off. 2. Reset the battery Step 1: Press and hold the button until the ''CLr'' character is displayed in the power display area, and then release the button; Step 2: At this time, the battery flashes to indicate that the battery is currently reset. If you press the button again for a short time, the power data is cleared and reseted and flashing; Step 3: If there is no pressing operation within 5 seconds, it means that the power data is not reseted and exits the reset state. 3. Voltage alarm value setting Step 1: Press and hold the button until the ''SET'' character is displayed in the power display area, and then release the button; Step 2: After entering this state, the current high voltage alarm value is displayed in the voltage area, and the current low voltage alarm value is displayed in the current area, and the lowest digit starts to flash. At this time, you can ''+1'' this digit by short pressing the button. When it is over 3 seconds, it will automat Package List 1 x DC Current Voltage Meter 1 x Instruction Manual