Oxygen Sensor Replacement Compatible With Ao 02 AA428-210 Detector

(12) Differential pressure range:0-500mbar Max (2) Range:0-100%O2 (7) 100% oxygen in signal:1001% (15) Long-term output drift:Less than 10% signal loss/year Oxygen Sensor Ao-02 Gas Detector Compatible With Ao2 Aa428-210 Ao2ptb-18.10 Note:Due to different production batches, the product appearance slightly, which does not affect the use. (1) Output:9-13mV in air Colour:Red 1 * Oxygen Sensor (16) Recommended load resistance min:10kohm (6) T99.5 response time:Less than 40 seconds (4) Expected service life:360,000%O2 hours at 20, 286,000%O2 hours at 40, or two years in air at STP (14) Relative humidity range:0-99% non-condensing (13) Absolute pressure range:500-2000mbar Only the above package content, other products are not included. The output of the AO2 sensor changes with temperature, but the thermistor is gradually integrated to compensate compatible with these changes. The thermistor is used to give the AO2 a very stable output over a wide temperature range. Package Contents: (8) Linearity:0-100%O2 (9) Zero offset:Less than 20V (5) T90 response time:Less than 5 seconds Material:Plastic (11) Temperature compensation:Less than 2% variation 0 to 40(as shown) (10) Temperature range:-20-+50 The AO2 PTB-18.10 oxygen sensor used in the oxygen index meter is a consumable item. When it comes into contact with air, a chemical reaction begins. AO2 Product Parameters: (3) Accuracy:0.01%O2 Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.